Arrangement Of The Throttle Body Components Couplers - Yamaha Waverunner FX 160 Service Manual

FUEL

ARRANGEMENT OF THE THROTTLE BODY COMPONENTS COUPLERS

8
3
1 Bypass valve motor coupler
2 Joint coupler
3 Sensor assembly coupler
4 Fuel injector #4 coupler
5 Fuel injector #3 coupler
6 Fuel injector #2 coupler
7 Fuel injector #1 coupler
8 Throttle position sensor
coupler
ARRANGEMENT OF THE THROTTLE BODY
COMPONENTS COUPLERS
1
7
A
È To wiring harness
É Route
between the sub-wiring har-
ness.
Ê Route the sub-wiring harness
under the intake vacuum hose.
Ë To fuel injector #3
Ì Fasten the sub-wiring harness
to the joint coupler bracket with
a plastic tie as shown in the
illustration.
B 2
Ê
É
6 5
2
Í
2
the throttle cable
4-1
3
A
4
È
Ë
Ì
B
Í Fasten the ring, which is
attached to the sub-wiring har-
ness, to the sensor assembly
bracket with a plastic tie. Face
the end of the plastic tie
towards the sensor assembly.
E