Clear Ethernet_Oam Ports - D-Link DGS-1100-06/ME Cli Reference Manual

To show Ethernet OAM event log on port 1:
DGS-1100-06/ME:5# show ethernet_oam ports 1 event_log
Command: show ethernet_oam ports 1 event_log
Port 1
-----------------------------------------------------------------------
Event Listing
Index Type
----- ------------------------------------------- -------------
Local Event Statistics
Error Symbol Event
Error Frame Event
Error Frame Period Event
Errored Frame Seconds Event
Critical Event
Remote Event Statistics
Error Symbol Event
Error Frame Event
Error Frame Period Event
Errored Frame Seconds Event
Critical Event
DGS-1100-06/ME:5#

clear ethernet_oam ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear port 1 OAM statistics:
DGS-1100-06/ME:5# clear ethernet_oam ports 1 statistics
Command: clear ethernet_oam ports 1 statistics
Success!
DGS-1100-06/ME:5#
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to clear Ethernet OAM port statistics or event log.
clear ethernet_oam ports [all | <portlist>] [event_log| statistics]
The clear ethernet_oam ports command is used to clear Ethernet
OAM ports statistics or event log information.
[all | <portlist>] – Specifies a range of ports or all ports to clear OAM
statistics or event log.
[event_log | statistics]> – Specifies an index range to display.
None.
Location Time Stamp
---------------------
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
260