Delete Vlan - D-Link DGS-3100 SERIES Cli Manual

delete vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove a vlan v1:
config vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add ports 4 through 8 at device #1as tagged ports to the VLAN v2:
To delete a previously configured VLAN on the Switch.
delete vlan <vlan_name 32>
The delete vlan command deletes a previously configured VLAN on
the Switch.
<vlan_name 32> − The name of the VLAN to be deleted.
Only administrator or operator-level users can issue this command.
DGS3100# delete vlan v1
Success.
DGS3100#
To add additional ports to a previously configured VLAN.
config vlan <vlan_name 32> [add [tagged | untagged |
forbidden] | delete] [ <portlist> | <ch1-32> ]
The config vlan command allows the user to add or delete ports to
the port list of a previously configured VLAN. You can specify the
additional ports as tagging, untagging, or forbidden. The default is to
assign the ports as untagged.
<vlan_name 32> − The name of the VLAN to which to add ports.
add − Specifies that ports are to be added to a previously created
vlan.
delete - Specifies that ports are to be deleted from a previously
created vlan.
tagged − Specifies the additional ports as tagged.
untagged − Specifies the additional ports as untagged.
forbidden − Specifies the additional ports as forbidden.
<portlist> − A port or range of ports to be added to or deleted from
the VLAN.
<ch1-32> − assigns ports to a port-channel.
Only administrator or operator-level users can issue this command.
DGS3100# config vlan v2 add tagged 1:4-8
Success.
DGS3100#
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
90