Reboot-Lap - Avaya W310 Command Reference Manual

reboot-lap

User level: privileged, supervisor.
Use the reboot-lap command to reboot the Light Access Point LAP(s) by shutting
down the power to the LAP(s) and turning the power back on. You can reset all the LAPs in
your domain or specify a LAP to reboot. The LAP will maintain its configuration.
Syntax:
The syntax for this command is:
reboot-lap all | <lap_name>}
Syntax
all
<lap_name>
Message:
After this command is initiated, the LAP must reboot for any change to this setting to take
effect. The following message displays after you initiate this command:
This command will reboot the LAP(s). Do you want to continue (Y/N)?
• Type Y to reboot the LAP.
• Type N to cancel the reboot. The change in this setting will not take effect.
Avaya W310 Command Reference Guide
Description
Reboots all the LAPs in your domain.
Name of the LAP you want to reboot. The name must be the
LAP's assigned Network Name.
Chapter 8
121