Chromquest Data System Instrument Configuration - Thermo Scientific Accela PDA Hardware Manual

3
Configuration

ChromQuest Data System Instrument Configuration

ChromQuest Data System Instrument Configuration
30 Accela PDA Detector Hardware Manual
To control the PDA detector from the ChromQuest data system, add it to the instrument
configuration for the Accela LC system.
To configure your instrument in the ChromQuest data system
1. Do one of the following:
• For ChromQuest SI, choose Start > All Programs > Chromatography >
ChromQuest SI Config. In the ChromQuest SI Configuration dialog box, click
Instrument Configuration. The Instrument Configuration dialog box appears
(Figure 24). Go to
• For ChromQuest, go to
2. If you have not already done so, create an instrument for your Accela LC stack:
a. Double-click the ChromQuest icon on the Windows XP desktop. Or, choose Start >
All Programs > Chromatography > ChromQuest.
The Main Menu window appears.
b. In the Main Menu window, right-click The Enterprise.
A shortcut menu appears.
c. Choose New > Instrument.
A new instrument icon appears in the right pane of the Main Menu window.
3. In the Main Menu window, right-click the icon that represents your Accela LC stack.
A shortcut menu appears.
4. Choose Configure > Instrument.
The Instrument Configuration dialog box appears (see
Figure 24. Instrument Configuration dialog box
5. Type a name for your instrument in the Instrument name box.
step 5.
step 2.
Figure 24).
Thermo Scientific