Table of Contents
Advertisement
Thermo Scientific
The Lamp Start Up Time dialog box appears (see
Figure 29. Lamp Startup Time dialog box
4. To change the time, click in the Xcalibur should start the lamps at box. Then use the
keyboard arrow keys, the number keys, or both to change the time.
Tip If you inadvertently click the Xcalibur should start the lamps at box more than
once to make a new entry, close the dialog box, and then reopen it. This time take
care to use only the keyboard arrow keys and number keys to enter a time value.
5. Click OK to apply the new lamp startup time.
Use the Programmed Start option to pre-warm the lamps before starting a sequence of sample
analyses.
4
Xcalibur Diagnostics for the PDA Detector
Controlling the Lamps from the Xcalibur Data System
Figure
29).
Accela PDA Detector Hardware Manual
37
Advertisement
Table of Contents
