Table of Contents
Advertisement
Checking the Firmware Version
Thermo Scientific
Occasionally, upgraded firmware becomes available for the Accela PDA Detector. Ask your
Thermo Fisher Scientific Service Representative about the availability of new firmware.
To check the firmware version in the ChromQuest data system
1. Open the Diagnostics dialog box (see
Detector"
on
page
62).
2. Click the Display tab.
The Display page appears.
3. Click On.
The firmware version of the Accela PDA Detector appears in the Status area on the left
side of the Display page (see
5
ChromQuest Diagnostics for the PDA Detector
"Accessing the Direct Controls for the Accela PDA
Figure 57
on
page
67).
Accela PDA Detector Hardware Manual
Checking the Firmware Version
81
Advertisement
Table of Contents
