Thermo Scientific Accela PDA Hardware Manual page 116

6
Routine Maintenance
Replacing the Fuses
96 Accela PDA Detector Hardware Manual
When you apply a sufficient amount of leverage, the door pops up (see
Figure 79. Power entry module door loosened
3. Open the door (see Figure
Figure 80. Power entry module door opened
4. Take the loose fuse holder out of the power entry module (see
Figure 81. View of the fuse holder
5. Replace the fuses.
6. Put the fuse holder back into the power entry module, and then close the power entry
module door until it snaps in.
80).
Fuse holder
Power entry module door
Fuse holder
Figure 79).
Figure 81).
Thermo Scientific