Thermo Scientific Accela PDA Hardware Manual page 3

Thermo Fisher Scientific performs complete testing and evaluation of its products to ensure full compliance with
applicable domestic and international regulations. When the system is delivered to you, it meets all pertinent
electromagnetic compatibility (EMC) and safety standards as described in the next section or sections by product name.
Changes that you make to your system might void compliance with one or more of these EMC and safety standards.
Changes to your system include replacing a part or adding components, options, or peripherals not specifically
authorized and qualified by Thermo Fisher Scientific. To ensure continued compliance with EMC and safety standards,
replacement parts and additional components, options, and peripherals must be ordered from Thermo Fisher Scientific
or one of its authorized representatives.
EMC Directive 2004/108/EC
EMC compliance has been evaluated by TUV Rheinland of North America, Inc.
EN 61326-1 2006
EN 55011 2007, A2: 2007
EN 61000-3-2 2006
EN 61000-3-3 1995, A1: 2001, A2: 2005
EN 61000-4-2 1995, A1: 1999, A2: 2001
FCC Class A, CFR 47 Part 15: 2007
Low Voltage Safety Compliance
Low Voltage Safety Compliance has been evaluated by TUV Rheinland of North America, Inc.
This device complies with Low Voltage Directive 2006/95/EC and harmonized standard EN 61010-1:2001,
IEC 61010-1:2002, UL 61010 A-1:2004, CAN/CSA 22.2 61010-1:2004.
Regulatory Compliance
Accela PDA Detector (80 Hz version)
EN 61000-4-3 2006
EN 61000-4-4 2004
EN 61000-4-5 2005
EN 61000-4-6 2007
EN 61000-4-11 2001