Changing The Remote Output Polarities From The Chromquest Data; System - Thermo Scientific Accela PDA Hardware Manual

Changing the Remote Output Polarities from the ChromQuest Data System
Figure 18. Accela PDA page of the Instrument Status window (ChromQuest data system)
Thermo Scientific
To change the polarity of the remote outputs
1. Install the ChromQuest data system if you have not already done so.
2. Add the Accela PDA Detector to the instrument configuration (see
System Instrument Configuration"
3. Open the Instrument window.
4. Choose Control > Instrument Status.
The Instrument Status window appears.
5. Click the Accela PDA tab.
The Accela PDA page of the Instrument Status window appears (see
6. In the Output States area, click the appropriate button.
on page 30).
Accela PDA Detector Hardware Manual
2
Installation
Connecting the Remote Outputs
"ChromQuest Data
Figure 18).
23