Thermo Scientific Accela PDA Hardware Manual page 40

2
Installation
Installing the LightPipe Flowcell
20 Accela PDA Detector Hardware Manual
Figure 16. Inlet and outlet tubing connections for the 50 mm LightPipe flowcell
Retaining
block
Red, insulated inlet tubing
0.005 in. ID
10. Replace the flowcell access cover, ensuring that the inlet and outlet tubing pass through
the slots (see Figure 13
secure the flowcell access cover to the detector.
11. Close the front doors of the detector.
Retaining block
bolt knob
Blue outlet tubing
0.010 in. ID
on page 17) without being pinched. Tighten the captive screw to
Thermo Scientific