Thermo Scientific Accela PDA Hardware Manual page 124

8
Accessories and Replaceable Parts
104 Accela PDA Detector Hardware Manual
Table 9. Maintenance parts
Part number
00010-01-00015
60257-60006
2522-0285
803260
703950
00006-02-00010
00006-02-00011
Table 10. Repair and service parts
Part number
60262-61000R
60262-61200R
00012-01-00023
60257-63002
60257-63004
60257-63003
60057-61000
60257-60007
803226
Table 11. Accela PDA Detector Accessory kit
Part number
A3538-010
A3638-110
6040-0103
00004-02511
F3012-010
F5034-010
70111-63302
Description
Deuterium lamp assembly (pre-aligned)
Tungsten-halogen (W) lamp assembly (pre-aligned)
Fingertightening, 10-32, one-piece PEEK fitting
Inlet tubing, with insulation, PEEK 1/16 × 0.005 in. ID (Red)
Outlet tubing, PEEK 1/16 × 0.010 in. ID (Blue)
Fuse, T3.15 A (5 × 20 mm) (for 100/115 V operation)
Fuse, T1.6 A (5 × 20 mm) (for 230 V operation)
Description
Assy, CPU, PCBA,
Assy, PCB, lamp power supply board
Low Voltage Power Supply PCB
Cooling fan
Power entry module assembly
Power switch
LED assembly
Standard filter wheel
Cable, ribbon, CPU to Lamp Power Supply PCB
Description
Cable adapter, RJ45/14-D89FM
Cable, 4-pin, RJ45
Analog cable, detector
Connector, plug, 8-pin, 3.81 mm pitch, minicombicon
Funnel, drainage
Tubing, convoluted, detector drainage
Cable, Ethernet, straight patch with ferrite, 7 ft
Thermo Scientific