Snmp-Server Host - Cisco Catalyst 3750 Metro Command Reference Manual

Hide thumbs Also See for Catalyst 3750 Metro:
Table of Contents

Advertisement

snmp-server host

snmp-server host
Use the snmp-server host global configuration command to specify the recipient (host) of a Simple
Network Management Protocol (SNMP) notification operation. Use the no form of this command to
remove the specified host.
Syntax Description
host-addr
informs | traps
version 1 | 2c | 3
vrf vrf-instance
Catalyst 3750 Metro Switch Command Reference
2-634
snmp-server host host-addr [informs | traps] [version {1 | 2c | 3 {auth | noauth| priv}] [vrf
vrf-instance] {community-string [notification-type]}
no snmp-server host host-addr [informs | traps] [version {1 | 2c | 3 {auth | noauth | priv}}]
community-string
Name or Internet address of the host (the targeted recipient).
(Optional) Send SNMP traps or informs to this host.
(Optional) Version of the Simple Network Management Protocol (SNMP)
used to send the traps.
These keywords are supported:
1—SNMPv1. This option is not available with informs.
2c—SNMPv2C.
3—SNMPv3. These optional keywords can follow the version 3 keyword:
Note
(Optional) Virtual private network (VPN) routing instance and name for this
host.
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
auth (Optional). Enables Message Digest 5 (MD5) and Secure Hash
Algorithm (SHA) packet authentication.
noauth (Default). The noAuthNoPriv security level. This is the default
if the [auth | noauth | priv] keyword choice is not specified.
priv (Optional). Enables Data Encryption Standard (DES) packet
encryption (also called privacy).
The priv keyword is available only when the crypto (encrypted)
software image is installed.
OL-9645-10

Advertisement

Table of Contents
loading

Table of Contents