Remove Camshafts; Remove Cylinder Heads - Toyota 22R-E Service Manual

ENGINE – ENGINE MECHANICAL

36. REMOVE CAMSHAFTS

(a) Uniformly loosen and remove the twelve bearing cap
bolts one side of each cylinder head in several passes,
in the sequence shown, then do the other side as
shown.
(b) Remove the ten camshaft bearing caps, two oil seals
and two camshafts.
HINT: Arrange the bearing caps in correct order.

37. REMOVE CYLINDER HEADS

(a) Remove the cylinder head (6 pointed head) bolt from
each cylinder head.
EG2–59