California Vehicles Only; There Is No Voltage Between Ecm Terminals Vf And E1 - Toyota 22R-E Service Manual

EG1–138
(California Vehicles
only)
ENGINE – MFI SYSTEM

(1) There is no voltage between ECM terminals VF and E1.

Check that there is voltage between ECM terminal VF and body
ground.
Check wiring between ECM terminal E1 and body ground.
Try another ECM.
Is air leaking into air induction system?
Check spark plugs.
Check distributor and ignition system.
OK
CONTINUED ON PAGE
BAD
Repair or replace.
YES
Repair air leak.
BAD
Repair or replace.
BAD
Repair or replace.
EG1–139