Remove Exhaust Manifold From Lh Cylinder Head; Cylinder Heads Disassembly; Remove Camshaft Housing Plugs; Remove Valve Lifters And Shims - Toyota 22R-E Service Manual

ENGINE – ENGINE MECHANICAL
40. REMOVE EXHAUST MANIFOLD FROM LH
CYLINDER HEAD
(a) Remove the three nuts and exhaust manifold heat
insulator.
(b) Remove the six nuts, exhaust manifold and gasket.

CYLINDER HEADS DISASSEMBLY

(See Components)

1. REMOVE CAMSHAFT HOUSING PLUGS

(a) Remove the two bolts and housing rear cover.
(b) Remove the housing plug.

2. REMOVE VALVE LIFTERS AND SHIMS

Pull out the valve lifter and shim by hand.
HINT: Arrange the valve lifters and shims in correct
order.
3. REMOVE VALVES
(a) Using SST, compress the valve spring and remove the
two keepers.
SST 09202–43013
EG2–61