Remove The Adjusting Shim - Toyota 22R-E Service Manual

Table of Contents

Advertisement

EG2–20
ENGINE
ENGINE MECHANICAL
(d) Turn the crankshaft 1/3 revolution (120S), check the
clearance of the IN (No. 3) and EX (No. 5) valves.
Measure the valve clearance.
(See procedure in step (a))
(e) Turn the crankshaft 1/3 revolution (120S), check the
clearance of the IN (No. 4) and EX (No. 6) valves.
Measure the valve clearance.
(See procedure in step (a))
(f) Turn the crankshaft 1/3 revolution (120S), check the
clearance of the IN (No. 5) and EX (No. 1) valves.
Measure the valve clearance.
(See procedure in step (a))
8. ADJUST VALVE CLEARANCE
(a) Remove the adjusting shim.
Turn the crankshaft so that the cam lobe of the
camshaft on the adjusdting valve upward.
Position the notch of the valve lifter facing the
spark plug side.
Using SST (A), press down the valve lifter and
place SST (B) between the camshaft and valve
lifter. Remove SST (A).
SST 09248–55020 (09248–05011, 09248–05021)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

22r3vz-e

Table of Contents