Remove Exhaust Crossover Pipe; Disconnect Water By–Pass Pipe From Rh Cylinder Head; Remove No.2 Engine Hanger From Lh Cylinder Head; Remove Cylinder Head Covers - Toyota 22R-E Service Manual

EG2–58
ENGINE – ENGINE MECHANICAL

30. REMOVE EXHAUST CROSSOVER PIPE

Remove the six nuts, crossover pipe and two gaskets.
31. DISCONNECT WATER BY–PASS PIPE FROM RH
CYLINDER HEAD
Remove the bolt, and disconnect the water by–pass
pipe from the RH cylinder head.
32. REMOVE GENERATOR
33. REMOVE OIL DIPSTICK GUIDE AND DIPSTICK
(a) Remove the oil dipstick.
(b) Remove the bolt and oil dipstick guide.
34. REMOVE NO.2 ENGINE HANGER FROM LH
CYLINDER HEAD
Remove the two bolts and engine hanger.

35. REMOVE CYLINDER HEAD COVERS

Remove the eleven bolts, engine wire bracket, cylin–
der head cover and gasket. Remove the two cylinder
head covers.