ENGINE
–
COOLING SYSTEM
5. REMOVE WATER PUMP
Remove the six bolts, three nuts, water pump and
gasket.
WATER PUMP INSPECTION
1. INSPECT WATER PUMP BEARING
Check that the water pump bearing moves smoothly
and quietly.
2. INSPECT FLUID COUPLING
Check the fluid coupling for damage and silicone oil
leakage.
WATER PUMP INSTALLATION
(See page EG1–226)
1. INSTALL WATER PUMP OVER NEW GASKET
Install the water pump and a new gasket with the six
bolts and three nuts.
2. INSTALL WATER PUMP PULLEY AND FLUID
COUPLING WITH FAN
(See page
MA–6
step 9 on page EG1–44)
3. (with A/C)
INSTALL A/C BELT (See page MA–6)
4. (w/ PS)
INSTALL PS BELT (See page MA–6)
5. REFILL COOLANT
(See page EG1–225)
EG1–227