Install Generator; Install Water Inlet Hose; Connect Wiring To Generator; Fill With Coolant - Toyota 22R-E Service Manual

CH–16
CHARGING SYSTEM – Generator
INSTALLATION OF GENERATOR (22R–E)

1. INSTALL GENERATOR

Mount the generator on the bracket with the pivot and ad–
justing bolt.
2. INSTALL AND ADJUST DRIVE BELT
(See page MA–6)

3. INSTALL WATER INLET HOSE

(a) Install the water inlet hose.
(b) Install the engine under cover.
(c) (with A/C)
Install the No.2 fan shroud.

4. CONNECT WIRING TO GENERATOR

(a) Connect the wire to the generator and install the nut.
(b) Connect the connector to the generator.

5. FILL WITH COOLANT

Close the radiator drain cock and fill with coolant.
6. CONNECT NEGATIVE CABLE TO BATTERY
7. PERFORM ON–VEHICLE INSPECTION
(See page CH–2)