ENGINE
–
ENGINE MECHANICAL
CYLINDER HEADS REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE TERMINAL
OF BATTERY
2. REMOVE AIR CLEANER AND HOSE
3. DRAIN ENGINE COOLANT
4. REMOVE RADIATOR
(a) Disconnect the reservoir hose.
(b) (A/T only)
Disconnect the oil cooler hoses.
(c) Remove the radiator hoses.
(d) Remove the two clips and No.2 fan shroud.
(e) Remove the four bolts and No.1 fan shroud.
(f) Remove the four bolts and radiator.
5. (M/T only)
DISCONNECT CLUTCH RELEASE CYLINDER HOSE
6. REMOVE PS DRIVE BELT AND PUMP PULLEY
7. DISCONNECT PS PUMP FROM ENGINE
8. REMOVE A/C DRIVE BELT
EG2–51