Medium Current Fuse And High Current Fuse Equal Amperage Rating - Toyota 22R-E Service Manual

IN–6
Illustration
INTRODUCTION – GENERAL REPAIR INSTRUCTIONS
(b) When reusing precoated parts, clean off the old
adhesive and dry with compressed air. Then
apply the specified seal lock adhesive to the bolt,
nut or threads.
(c) Precoated parts are indicated in the component
illustrations by the "*" symbol.
7. When necessary, use a sealer on gaskets to prevent
leaks.
8. Carefully observe all specifications for bolt tightening
torques. Always use a torque wrench.
9. Use of special service tools (SST) and special service
materials (SSM) may be required, depending on the
nature of the repair. Be sure to use SST and SSM
where specified and follow the proper work proce–
dure. A list of SST and SSM can be found in the
preparation part at the front of each section in this
manual.
10. When replacing fuses, be sure the new fuse has the
correct amperage rating. DO NOT exceed the rating or
use one with a lower rating.
Symbol
FUSE
MEDIUM CURRENT FUSE
HIGH CURRENT FUSE
FUSIBLE L!1VK
CIRCUIT BREAKER
Abbreviation
Part Name
FUSE
M–FUSE
H–FUSE