CH–6
CHARGING SYSTEM
–
Generator
REMOVAL OF GENERATOR (22R–E)
1. DISCONNECT CABLE FROM NEGATIVE TERMINAL OF
BATTERY
2. (w/ PS)
DRAIN COOLANT
3. DISCONNECT WIRING FROM GENERATOR
(a) Disconnect the connector from the generator.
(b) Remove the nut and wire from the generator.
4. (w/ PS)
REMOVE WATER INLET HOSE
(a) Remove the engine under cover.
(b) Remove the water inlet hose.
(c) (with A/C)
Remove the No. 2 fan shroud.
5. REMOVE GENERATOR DRIVE BELT
(a) Loosen the generator pivot and remove the adjusting
bolt.
(b) Remove the drive belt.
6. REMOVE GENERATOR
(a) Hold the generator and remove the pivot.
(b) Remove the generator.