Remove Isc Pipe; Remove Pcv Pipe With Hoses; Remove Intake Air Connector; Remove Ignition Cover - Toyota 7M-GE Repair Manual

EM-12
ENGINE MECHANICAL - Engine Tune-up
r
(7M-GTE)
1.
REMOVE ISC PIPE
(a) Disconn&t the hoses from the ISC pipe.
(b) Remove'the two bolts and ISC pipe.
2. REMOVE PCV PIPE WITH HOSES
(a) Disconnect the oxygen sensor wire from the two
clamp.
:
(b) Disconnect the No.4 PCV hose from the 'PCV pitie.
(c) Remove the two bolts.
(d) Disconnect the PCV pipe with hoses from the
cylinder head covers and throttle body.
'.
ci
;- ,
. .
3. REMOVE INTAKE AIR CONNECTOR
(a) Disconnect the air valve hose from the intake air con-
nector.
(b) Loosen the clamp and remove the two bolts.
(c)
Remove the intake air connector.
4. REMOVE IGNITION COVER
(a) Remove the oil filler cap.
(b) Remove the five nuts and ignition coil cover.
c ,r
5. REMOVE IGNITION COIL WITH BRACKET
(a) Disconnect the connector and ground strap.
(b) Remove the nut.
(c) Remove the No.1 and No.2 high-tension cords from
the ignition coil and clamp.
IdI Remove the ignition coil with bracket and high-ten-
sion cords.
(e) Remove the No.1 and No.2 high-tension cords from
the spark plugs.