Terminals
No.
ENGINE
Trouble
No voltage
Cranking
(1) There is no voltage between ECM terminals STJ and E1.
(IG SW START)
(2) Check that there is voltage between ECM terminal + B (+ B1 ) and
body ground. (IG SW ON)
(3) Check cold start injector.
Replace cold start
injector.
Check wiring between ECM terminal E1 and body ground.
Try another ECM.
–
MFI SYSTEM
Condition
Engine coolant temperature
80 (176 F)
BAD
Check wiring between ECM and
cold start injector.
EG2–197
STD Voltage
Refer to No. 1.
BAD
Repair or replace
wiring.