Timing Chain Components; Preparation Of Removal; Remove Oil Pan - Toyota 22R-E Service Manual

ENGINE – ENGINE MECHANICAL
TIMING CHAIN
COMPONENTS

PREPARATION OF REMOVAL

1. REMOVE CYLINDER HEAD
(See page EG1–16)
2. REMOVE RADIATOR
(See page EG1–230)
3. (4WD)
REMOVE FRONT DIFFERENTIAL
(See SA section)

4. REMOVE OIL PAN

(a) Remove the engine undercover.
(b) Remove the engine mounting bolts.
(c) (2WD)
Place a jack under the transmission and raise the
engine approx. 25 mm (0.98 in.)
(d) Remove the sixteen bolts and nuts.
(e) Using SST and brass bar, separate the oil pan from the
cylinder block.
EG1–39