Upgrading The System - Provision ISR Ultra-Z IP series User Manual

Dome Speed:
This menu is to define the top speed of the dome.
Move the cursor to DOME SPEED and click IRIS + to enter to select the dome speed when
doing the pan movement.
Move the cursor to BACK/EXIT and click IRIS + to run the command of BACK or EXIT.
Power-Up Action:
cursor to POWER ON ACTION and click IRIS+ to enter the mode of setup
NONE
PRESET
SCAN
SEQ
PATTERN
The user can define the dome action when power on, Move the
(default) No action
Dome goes to preset. (Default as Preset 1)
Dome starts auto scan (Default as Auto Scan 1)
Dome runs auto cruise (Default as Auto Cruise 1)
Dome runs pattern (Default as Pattern 1)
79