Provision ISR Ultra-Z IP series User Manual page 40

Focus Settings
Focus Mode
The Focus Mode can be set to Auto, Manual, Semi-auto.
Auto:
The PTZ focuses automatically at any time according to objects in the scene.
Semi-auto:
The PTZ focuses automatically only once after panning, tilting and zooming.
Manual:
In Manual mode, you need to use
Min. Focus Distance
This function is used to limit the minimum focus distance. The value can be set to
1.5m, 3m, 6m, 10cm and 50cm.
Day/Night Switch
Day/Night Switch
The Day/Night Switch mode can be set to Auto, Day and Night.
Auto:
In Auto mode, the day mode and night mode can switch automatically according to the light
condition of environment. The switching sensitivity can be set to Low, Normal, High.
Day:
In Day mode, the PTZ displays color image. It is used for normal lighting conditions.
Night:
In Night mode, the image is black and white. Night mode can increase the sensitivity in
low light conditions.
Notes: When the IR Light Mode is auto, the day/night mode is adjusted automatically
according to the IR Light Mode. Manually setting the day/night mode is invalid.
When the IR Light Mode is manual and the IR Light Bright is 0, you can set the day/night
mode manually.
When the IR Light Mode is manual and the IR Light Bright is not 0, the night mode is set as the
default mode. Manually setting the day/night mode is invalid.
IR Light Mode
IR light mode can be set to Auto and Manual.
Auto: The brightness of the infrared light will be adjusted automatically. IR Light Sensitivity
value ranges from 0 to 100.
Manual: you need to adjust the brightness value of infrared light manually.
on the control panel to focus manually.
40