Provision ISR Ultra-Z IP series User Manual page 16

Note: The following presets are predefined with special commands. You can only call them but not
configure them. For instance, preset 95 is the "Open OSD Menu".
You may need to use the OSD (On Screen Display) menu when controlling the PTZ remotely. To
display the OSD menu on the live view screen, you can call the preset number 95. Note that the
OSD menu doesn't appear on the Analog CVBS output.
Serial
Command
No.
Open OSD Menu
3
1 Start Pattern Tour
Start Sequence Tour
1
3 Start Auto Scan
4
Remote Reset
Fast Call Up
Call 95
Call 97
Configure the Sequence via
Call 98
Configure the Auto Scan via
Call 99
Call 94
Note
Default to start pattern
tour of group No.1
the OSD Menu (Page 82)
the OSD Menu (Page 81)
16