Chapter 5 Ptz Configuration; Configuring Power Off Action; Configuring Park Actions - Provision ISR Ultra-Z IP series User Manual

Chapter 5 PTZ Configuration

5.1 Configuring Power Off Memory
Purpose:
This feature allows the dome to resume whichever actions that the PTZ was performing after a power
off has occurred.
Steps:
1. Enter the Basic Settings interface:
Configuration > PTZ > Basic
2. Select the duration after the power off where the camera should resume the last performed action:
3. Click "Save"

5.2 Configuring Park Actions

Purpose:
This feature allows the dome to start a predefined park action (scan, preset, patrol) automatically
after a period of inactivity (park time).
Note: Scheduled Tasks function is prior to Park Action function. When these two functions are set at
the same time, only the Scheduled Tasks function takes effect.
Steps:
1. Enter the Park Action Settings interface:
Configuration > PTZ > Park Action
Figure 5-7 Set the Park Action
20