Recording And Capturing Pictures Manually - Provision ISR Ultra-Z IP series User Manual

Icon Description
Live view on
Manually capture the pictures
Manual recording off
Audio on and adjust volume
Two-way audio off
3D positioning
Note: Before using the two-way audio or recording with audio functions, please set the
Stream Type to Video & Audio referring to Section 6.4.1 Configuring Video Settings.
Full-screen Mode:
You can double-click on the live video to switch the current live view into full-screen or
return to normal mode from the full-screen.
3D Positioning:
Steps:
1. Click on the tool bar of live view interface.
2. Operate the 3D positioning function: Left click a position of the live video. The
corresponding position will be moved to the center of the live video.
3. Hold down the left mouse button and drag the mouse to the lower right on the live video. The
corresponding position will be moved to the center of the live video and zoomed in.
4. Hold down the left mouse button and drag the mouse to the upper left on the live video. The
corresponding position will be moved to the center of the live video and zoomed out.

4.4 Recording and Capturing Pictures Manually

In the live view interface, click
record the live video. The local saving paths of the captured pictures and clips can be set in the
Configuration > Local Configuration interface.
To configure remote automatic recording, please refer to Section 7.2 Configuring Recording Schedule.
Note: The captured image will be saved as a JPEG file in your computer.
Table 4-1 Descriptions of the Toolbar
on the toolbar to capture the live pictures or click
Icon Description
Live view off
Manual recording on
Mute
Two-way audio on
Manual tracking
to
13