Provision ISR Ultra-Z IP series User Manual page 42

Figure 6-34 Manual White Balance
Outdoor
You can select this mode when the PTZ is installed in outdoor environment.
Indoor
You can select this mode when the PTZ is installed in indoor environment.
Fluorescent Lamp
You can select this mode when there are fluorescent lamps installed near the PTZ.
Image Enhancement
3D Digital Noise Reduction
You can enable or disable the 3D Digital Noise Reduction function as shown in Figure
6-35. The level ranges from 0 to 100.
Figure 6-35 3D Digital Noise Reduction
De-fog Mode
When there is fog in the image, you can enable this function to get clear image.
Chroma Suppress
The Chroma Suppress level ranges from 0 to 100 as shown in F igure 6-36.
Figure 6-36 Chroma Suppress
Video Adjustment
Mirror
If you turn the MIRROR function on, the image will be flipped. It is like the image in the mirror. The
flip direction can be set to OFF, LEFT/RIGHT, UP/DOWN or CENTER.
Video Standard
You can set the Video Standard to 50hz (PAL) or 60hz (NTSC) according to the video system in your
country.
Other
Lens Initialization
The lens operates the movements for initialization when you check the check box of
Lens Initialization. Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can be set to 20,
40, 80, 160 and 320.
Local Output
You can select the output mode to ON or OFF.
42