Configuring Snapshot Settings - Provision ISR Ultra-Z IP series User Manual

Note: You need to reboot the PTZ after importing configuration file.
3. Click and set the saving path to save the configuration file in local storage.
Figure 10-12 Import/Export Configuration File
10.6.4 Upgrading the System
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click
to start remote upgrade.
Note: The upgrading process will take 1 to 10 minutes. Please don't disconnect power of the PTZ
during the process. The PTZ reboots automatically after upgrading.
10.7 RS-485 Settings
Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of the PTZ
parameters should be done before you control the PTZ unit.
Steps:
1. Enter RS-485 parameter setting interface:
Configuration> Advanced Configuration> System > RS485
to select the local upgrade file and then click
Figure 10-13 Remote Upgrade
72