Cpr105 Flat Prism - Leica Builder Series User Manual

Builder, Operation
5.6
Descprition
Prism mounting

CPR105 Flat Prism

The standard supplied Flat Prism (delivered with Builder 200 and 300) has two different
reflective surfaces. The highly reflective cat-eye surface can be used for measurements
up to 250 m. The reflective tape has printed crosshairs for precise aiming at close
range. The closer the Flat prism is mounted to the ground, the more accurate it can be
positioned over the measured point. For more precise positioning at higher prism posi-
tions, the GLS111 reflector pole with GAD105 adapter is recommended.
GLI115
GLS115
CPR105
58
CPR105
GAD105
GLS111