Layout - Leica Builder Series User Manual

Builder, Application Programs, for Builder 200 or higher
10.2
Description
Diagram

Layout

The application program Layout is used to place markers in the field at predeter-
mined points. These predetermined points are the points to be staked. The points to
be staked are defined by entering line and offset or easting, northing and height
depending on the used setup method. For Builder 300 or higher the points can also
be selected from the memory even via a wildcard search. The program calculates and
displays the difference between the measured point and the point to be staked.
P1
d1
P2
d3
d2
P0
P0 Station
P1 Current position
P2 Point to be staked
d1 < :> go forward or < :> go back
d2 < :> go right or <
d3 < :> fill or < :> cut
108
:> left