Leica Builder Series User Manual page 112

Builder, Application Programs, for Builder 200 or higher
Field Description
<Line:> Available if a Setup method with Control Line was used.
Longitudinal offset of the start point of the control line in the direc-
tion of the second point of the control line.
Line is positive in the direction from line start point to second line
point.
<Offs:> Available if a Setup method with Control Line was used.
Cross offset to the control line.
Offset is positive at the right hand side of the control line.
<E:> Available if a Setup method with Coordinates was used.
Easting of measured point.
<N:> Available if a Setup method with Coordinates was used.
Northing of measured point.
<H:> Height of measured point.
112