Leica Builder Series User Manual page 150

Builder, Data Management Mode, for Builder 300 or higher
View and select a
job step-by-step
Delete a job step-
by-step
1. Make sure that DATA Mode is active.
2. Press JOB to access job management.
3. Press to toggle through the jobs and select job.
4. Accept with OK.
The selected job is set as active job.
1. Make sure that DATA Mode is active.
2. Press JOB to access job management.
3. Press to toggle through the jobs and select job.
4. Press DELETE.
5. Accept with YES.
The selected job is deleted. Data is not recoverable.
150