Instrument Protection (Pin) - Leica Builder Series User Manual

13.2
Description
Activate PIN code
step-by-step
Builder, System Info and Instrument Protection

Instrument Protection (PIN)

The instrument can be protected by a Personal Identification Number. If the PIN
protection is activated, the instrument will always prompt for a PIN code entry after
starting up. As soon as the PIN was activated the access to the PIN code settings
requires the PIN. If a wrong PIN has been typed in five times, a Personal UnblocKing
code is required which can be found on the instrument delivery papers. If the PUK
code was entered correctly, the PIN code is set to default value "0" and the PIN
protection is deactivated.
1. Turn on the instrument by pressing the
2. Make sure that THEO mode is active.
3. Press for approximately 5 seconds.
4. Press PIN to access PIN code settings.
5. Activate PIN by setting <Use PIN-Code>: On.
6. Enter your desired personal PIN Code (max. 6 character numeric) in <New PIN-
Code>:.
7. Accept with OK.
Now the instrument is protected against unauthorized use. After switching on the
instrument or re-enter in the PIN settings the PIN code entry is necessary.
key.
171