Leica Builder Series User Manual page 109

Example of a layout
application screen
Builder, Application Programs, for Builder 200 or higher
Field Description
<Pt:> The identifier for the points to be staked.
Available for Builder 300 or higher.
<Line:> Available if a Setup method with Control Line was used.
Longitudinal offset of the start point of the control line in the direc-
tion of the second point of the control line.
Line is positive in the direction from line start point to second line
point.
<Offs:> Available if a Setup method with Control Line was used.
Cross offset to the control line.
Offset is positive at the right hand side of the control line.
APPL To start application
programs menu.
MEASURE To measure and display
stake out differences.
To turn on/off Tracking
mode by pressing for
approximately 5 seconds.
SETUP To start station setup
menu.
109