Leica Builder Series User Manual page 204

Builder, Construction Data Manager
Using USB cable
connection for the
first time (only for
Builder 300 or
higher)
Model
Builder 400 series
Builder 500 series
1. Make sure that you have installed Microsoft ActiveSync (for Windows XP) or
Microsoft Windows Mobile Manager (for Windows Vista) on your PC.
Refer to "16.2 Installation".
2. Turn on the Builder and open the Communication side cover.
3. Plug the Mini USB connector of the GEV223 USB cable into the Mini USB port of
the instrument.
4. Plug the standard USB connector of the GEV223 USB cable into a free USB port
of your PC.
Microsoft ActiveSync/Windows Mobile Manager will start and after some seconds
a window will pop up and ask you whether you want to make a new Partnership.
5. Select YES and click NEXT.
6. In the Select number of Partnerships window, select YES and click NEXT.
7. In the Synchronization Settings, just click NEXT.
8. Confirm the Setup Complete screen with a click on FINISH.
The connection is properly established when you see a green icon with two white
arrows in the Microsoft Windows Tray next to the clock.
COM setting
Baud rate Parity
115200 NONE
115200 NONE
Data bits Stop bits
8 1
8 1
204