Maintenance Key Upload - Leica Builder Series User Manual

Builder, System Info and Instrument Protection
13.4
Description
Access step-by-
step
Loading mainte-
nance key file step-
by-step

Maintenance Key Upload

To fully activate hardware functionality, onboard applications and maintenance
contracts, licence keys may be required on the instrument. For all instruments,
licence keys can be manually entered or up-loaded via Construction Data Manager.
For instruments fitted with a Communication side cover licence keys can also be
uploaded via a USB memory stick.
1. Turn on the instrument by pressing the
2. Make sure that THEO mode is active.
3. Press the ESC key for approximately 5 seconds.
4. Press the SW info button to get into the Software Info menu.
5. Press the MAIN.K button to get to the next step.

Never disconnect the power supply during the system upload process. The
battery must be at least at 75% capacity before commencing the upload.
1. To load maintenance key file: In the Enter license key menu, select the method
Upload key file.
The license key file must be stored in the System folder to be transferred to the
instrument.
2. Press OK.
Once successfully loaded, the instrument will show a message of completion.
key.
176