Fixpoints - Leica Builder Series User Manual

11.4
Description
Create a new
fixpoint step-by-
step
Builder, Data Management Mode, for Builder 300 or higher

Fixpoints

Fixpoints contain at least a point identifier, easting and northing or height.
Fixpoints can be
• created, viewed and deleted in the field.
• downloaded for data transfer to a further program.
• uploaded, for example for stakeout operations.
1. Make sure that DATA Mode is active.
2. Press to set <Type:> Fixpoint.
3. Press POINTS to access point management.
4. Press NEW PT to create a new fixpoint.
5. Enter point identifier, easting, northing and/or height.
6. Accept with OK.
The new point is created.
151