Setup Option 3: Establish Height; General - Leica Builder Series User Manual

Builder, Station Setup, for Builder 200 or higher
9.4
9.4.1
Description
Enter station
height, instrument
height and
reflector height
step-by-step

Setup Option 3: Establish Height

General

The Setup Option Establish Height is used to enter the station height, instrument
height and reflector height. All further measuring points and points to be staked are
in relation to the entered values.
1. Make sure that PROG Mode is active.
2. Press SETUP.
3. Press to highlight Setup option Height.
4. If a value for station height is shown, the value is related to the chosen setup
method of Control Line or Coordinates. This value may be changed or in case
of <-----.---->, a height can be entered.
5. Enter station height, instrument height and reflector height.
6. Accept with OK.
104