Leica Builder Series User Manual page 154

Builder, Data Management Mode, for Builder 300 or higher
Delete a measure-
ment step-by-step
1. Make sure that DATA Mode is active.
2. Press to set <Type:> Measurement.
to set focus on <Pt:>.
3. Press
4. Press to toggle through the points and select point.
5. Press POINTS to access point management.
6. Press DELETE to delete point.
7. Accept with YES.
The selected point is deleted. Data is not recoverable.

Deleting measurements is not available for application programs Tie
Distance and Area because of the result calculation.
154