Leica Builder Series User Manual page 107


Builder, Application Programs, for Builder 200 or higher
Application program
Hidden Point
COGO
Layout Line/Arc/Spiral
Measure & Descriptor
Descriptions on this page apply to Builder 300 or higher. Available options depend on
the model.
Description
To measure points that are not directly visible. Two
methods: using a rod with two targets, alternatively
enter line of sight shift and/or side shift manually.
Performs coordinate geometry calculations such as inter-
sections and more.
Layout and as-built check of lines, arcs or spirals.
Includes road element and grid layout.
To measure and encode points.
107