Operation; Selection Of Language - Leica Builder Series User Manual

Builder, Operation
5
5.1
Description

Loading/Changing
languages

Operation

Selection of Language

After switching on the instrument the user is able to choose his preferred language.
The dialog to choose the language is only shown if two or more languages are loaded
onto the instrument and <Lang.Dialog: On> is set in Configuration mode or on
System Info dialog.
Instrument model To load an additional language
Builder 300 or
higher
or
to change the existing language(s),
connect the instrument to Construction Data Manager Version
6.0 or higher via the serial interface or USB cable and load
using Tools - Software Upload.
Alternatively store the Builder Firmware Language Files into
the System folder on the USB memory stick, insert the stick
into the instrument and load the languages via the upload tool
within System Info (refer to chapter "13.3 Software
Upload").
40