Measure & Descriptor - Leica Builder Series User Manual

10.10
Description

Example of
Measure &
Descriptor applica-
tion screen
Builder, Application Programs, for Builder 200 or higher
Measure & Descriptor
In the program Measure & Descriptor it is possible to give each measured point a
descriptor. Further it shows slope and horizontal distances and height differences.
The application program Measure & Descriptor is only available for the Builder 400
and 500.
Field Description
<Pt:> The identifier for the measured points.
<Desc.:> Entry of the description.
APPL To start application
programs menu.
M & R To measure and display
distances and record data.
To turn on /off laser pointer
by pressing for approxi-
mately 5 seconds (except
Builder 400).
SETUP To start station setup
menu.
143