Leica Builder Series User Manual page 152

Builder, Data Management Mode, for Builder 300 or higher
View a fixpoint
step-by-step
Delete a fixpoint
step-by-step
1. Make sure that DATA Mode is active.
2. Press to set <Type:> Fixpoint.
to set focus on <Pt:>.
3. Press
4. Press to toggle through the points.
The coordinates are displayed on same screen.
1. Make sure that DATA Mode is active.
2. Press to set <Type:> Fixpoint.
3. Press to set focus on <Pt:>.
4. Press to toggle through the points and select point.
5. Press POINTS to access point management.
6. Press DELETE to delete point.
7. Accept with YES.
The selected point is deleted. Data is not recoverable.
152