Accessing - Leica Builder Series User Manual

8.2
Access step-by-
step
Example of an
application
program screen
Builder, Program Mode, for Builder 200 or higher

Accessing

1. Turn on the instrument by pressing the
2. Level up the instrument. Refer to "5.2 Instrument Setup" for more information.
3. Press until PROG mode is active.
key.
APPL To start application programs
menu.
M&R To measure and display
distances and record data.
To turn on/off laser pointer by
pressing for approximately 5
seconds in all measure screens
(except Builder 400).
To turn on/off Tracking mode
by pressing for approximately
5 seconds in Layout applica-
tion.
SETUP To start station setup menu.
85