Measure And Record - Leica Builder Series User Manual

Builder, Program Mode, for Builder 200 or higher
8.4
Possibilities
Measure and
record (ALL-in-1)
step-by-step

Measure and Record

The Measure and Record function can be used in three different ways:
• Measure and record in one step (ALL-in-1)
• Combining the functions MEASURE and RECORD
• Using MEASURE only
1. Make sure that PROG Mode is active.
2. Make sure that <Measure&Record: ALL-in-1> is set.
Refer to "6 Configuration Mode" for information on how to make the setting.
3. Position the prism at the point to be measured.
4. Press M&R to measure and record the distance and angles to the point.
88